3 Medical Waste Incinerator of 20 kg/hr capacity with double burner.Medical Waste Incineration Systems. I’m interested to ruin about 200 kg stays. A Medical Incinerator project for Tehran municipality. Our goal for this project is to set up a plant in order to incinerate Medical waste with 50 ton/day capacity. A incinerator with 100 kg / hour burning capability. And it should work on diesel fuel, 2 chamber. Waste management
Section : environ 30×30 cm
*Inner diameter at top 3ft 0.9m
*Wall 1ft high is constructed with puddle swish
*Filled with big stones and puddle swish to ground level
Puissance électrique : environ 2 KW
*Inner diameter at base 3ft 0.9m
*Height of Iron bars from grate above floor 1ft
Material Required
En poids : au moins 30 kg
*2ltrs of coal tar
En volume : au moins 200 litres
*two empty kerosene tins for making port holes
*Puddle swish
Cheminée :
Post combustion : 1200°C
*outer diameter at base 6ft 1.8m
*Thickness of wall at base 18cm
Température :
Combustion : 900°C
Hauteur (minimal ): au moins 8 m
Combustion : au moins 80 KW
Incinerator
Puissance des brûleurs