Installation of waste non reusable burner system

Setup of waste non reusable system in airport.Incinerator with oil burner

–– The design should prevent any sort of launch of contaminating substances into dirt, surface area water and groundwater.

–– Burning area should get to a minimum of 860 degrees under the most damaging conditions with at least 6% oxygen. Since it will treat organic and harmful waste, temperature level has to reach at least 1100 degrees for at least 2 2nd.

–– Flue gases must be cooled down to 200 levels or reduced prior to flue gas therapy. The flue gas cleaning equipment maust go into the very least two-field electrostatic precipitator/ESPdust
Incineration Temparature: 800 Degree or over.
Native soil: ITALY. – Diesel burner.

–– 25Kg/h. It will certainly have generally paper, cardboard and also food, but it will surely incinerate medical waste. So the burner will have the ability to deal with organic and contaminated materials.

–– Spare components for a single year.Burning Capacity: 400kg/ Human Resources (Optimum Combustion time is 6 times/ Day).
Voltage: 220V.
Fan Power: need to not surpass 1.1 kw.

NO2- Should Not exceed 500mg/m3.
SO2- Should not surpass 400mg/m3.
CO- Don’t surpass 100mg/m3.
Feeding Door Size: less than 1000x1300mm.

–– It must be geared up with filter to minimize as well as include toxins from natural and clinical waste.

–– Easy to operate for virtually inexperienced employees.